document number: 93435 for technical ques tions, contact: diodes-tech@vishay.com www.vishay.com revision: 22-aug-08 1 schottky diode, 0.5 a MBR0530 vishay high power products features ? surface mountable ? very low forward voltage drop ? extremely fast switching ? negligible switching losses ? guard ring for enhanced ruggedness and long term reliability ? designed and qualified for industrial level description this schottky diode is ideally suited for low voltage, high frequency operations, as freewheeling and polarity protection. small size of the package allows proper use in application where compact size is critical, fitting also the gsm and pcmcia requirement. product summary i f(av) 0.5 a v r 30 v v f at 0.5 a at 25 c 0.430 v 2 1 (a) (k) sod-123 major ratings and characteristics symbol characteristics values units i f(av) dc 0.5 a v rrm 30 v i fsm t p = 10 ms sine 10 a v f 0.5 apk, t j = 100 c 0.35 v t j range - 65 to 150 c voltage ratings parameter symbol MBR0530 units maximum dc reverse voltage v r 30 v maximum working peak reverse voltage v rwm absolute maximum ratings parameter symbol test conditions values units forward current i f dc, t l = 126 c 0.5 a maximum peak one cycle non-repetitive surge current at t j = 25 c i fsm 5 s sine or 3 s rect. pulse following any rated load condition and with rated v rrm applied 75 10 ms sine or 6 ms rect. pulse 10
www.vishay.com for technical questi ons, contact: diodes-tech@vishay.com document number: 93435 2 revision: 22-aug-08 MBR0530 vishay high power products schottky diode, 0.5 a note (1) pulse width < 300 s, duty cycle < 2 % note (1) thermal runaway condition for a diode on its own heatsink electrical specifications parameter symbol test conditions values units maximum forward voltage drop v fm (1) 0.1 a t j = 25 c 0.375 v 0.5 a 0.430 0.1 a t j = 125 c 0.250 0.5 a 0.350 maximum reverse leakage current i rm (1) v r = 15 v t j = 25 c 20 a v r = 30 v 130 maximum junction capacitance c t v r = 5 v dc (test signal range 100 khz to 1 mhz) t j = 25 c 90 pf maximum voltage rate of change dv/dt rated v r 10 000 v/s thermal - mechanical specifications parameter symbol test conditions values units maximum junction and storage temperature range t j (1) , t stg - 65 to 150 c maximum thermal resistance, junction to lead r thjl mounted on pc board fr4 with minimum pad size 150 c/w maximum thermal resistance, junction to ambient r thja 1" square pad size (1 x 0.5" for each lead) on fr4 board 200 approximate weight 0.012 g marking device case style sod-123 by w lc dp tot dt j ------------- 1 r thja -------------- <
document number: 93435 for technical ques tions, contact: diodes-tech@vishay.com www.vishay.com revision: 22-aug-08 3 MBR0530 schottky diode, 0.5 a vishay high power products fig. 1 - maximum forward voltage drop characteristics (per leg) fig. 2 - typical values of reverse current vs. reverse voltage (per leg) fig. 3 - typical junction capacitance vs. reverse voltage (per leg) fig. 4 - maximum allowable case temperature vs. average forward current fig. 5 - forward power loss characteristics fig. 6 - maximum non-repetitive surge current note (1) formula used: t c = t j - pd x r thjc ; pd = forward power loss = i f(av) x v fm at (i f(av) /d) (see fig. 4) 0.01 1.0 0.1 10 i f - instantaneous forward current (a) v fm - forward voltage drop (v) 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0 t j = 150 c t j = 125 c t j = 25 c 0.0001 0.1 1.0 10 0.01 0.001 100 i r - reverse current (ma) v r - reverse voltage (v) 10 515202530 0 t j = 150 c t j = 125 c t j = 100 c t j = 75 c t j = 50 c t j = 25 c 10 100 1000 c t - junction capacitance (pf) v r - reverse voltage (v) 10 5152025 3 0 0 t j = 25 c 80 90 100 110 120 130 140 160 150 allowable case temperature (c) i f(av) - average forward current (a) 0.4 0.2 0.6 0.8 0 dc see note (1) d = 0.20 d = 0.25 d = 0.33 d = 0.50 d = 0.75 square wave 0 0.1 0.2 0.3 average power loss (w) i f(av) - average forward current (a) 0.2 0.4 0.8 0.6 0 dc rms limit d = 0.20 d = 0.25 d = 0.33 d = 0.50 d = 0.75 10 1 100 i fsm - non-repetitive surge current (a) t p - square wave pulse duration (s) 100 1000 10 000 10 at any rated load condition and with rated v rrm applied following surge
www.vishay.com for technical questi ons, contact: diodes-tech@vishay.com document number: 93435 4 revision: 22-aug-08 MBR0530 vishay high power products schottky diode, 0.5 a ordering information table device package marking base quantity delivery mode MBR0530 sod-123 by w lc 3000 tape and reel links to related documents dimensions http://www.vishay.com/doc?95053 packaging information http://www.vishay.com/doc?95061
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
